LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System/Component Tests >> Module Checks >> DISTRIBUTORLESS Ignition System (Dis) Module
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DISTRIBUTORLESS Ignition System (Dis) Module

  1. Turn ignition off. Using DVOM, connect negative lead to negative battery post and positive lead to DIS connector IGND terminal with connector attached. Resistance should be 5 ohms.
  2. If resistance is not as specified, verify module base plate and mounting screws are clean and tight. If base plate and mounting screws are okay, replace module.
scientia non olet · About LEMON Manuals