Exhaust System BACKPRESSURE
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1991 Ford Ranger, 1991 Ford RV Cutaway, 1991 Ford Pickup, 1991 Ford F-Super Duty, and 1991 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Using a vacuum or pressure gauge, check exhaust system. Remove O[I2] sensor or air injection check valve (if equipped). Connect a 0-5 psi pressure gauge, and run engine at 2500 RPM. If exhaust system backpressure is greater than 1 3/4 - 2 psi, exhaust system or catalytic converter is plugged.
If using a vacuum gauge, connect vacuum gauge hose to intake manifold vacuum port, and start engine. Observe vacuum gauge. Open throttle part way and hold steady. If vacuum gauge reading slowly drops after stabilizing, check exhaust system for restrictions.