LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Probe GL, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Drive Axle Shafts >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Drive Axle Shafts: Installation

  1. Install NEW circlip on transaxle end of axle. Replace oil seal (if necessary). Remove transaxle plug, and carefully install axle into transaxle. Ensure circlip snaps into retaining groove.
  2. Install axle into hub. Install NEW axle nut. Tighten all bolts and nuts to specification. See TORQUE SPECIFICATIONS  . Stake NEW axle nut with blunt nose chisel. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals