Overhaul - ATX/FLC: Identification
NOTE:
Manufacturer's nomenclature changed in 1992 to FLC from ATX but transmission is the same.
Transaxle can be identified by the letter "B" on lower line of Vehicle Certification Label under "TR". The label is attached to left side door lock panel. Gear ratio is determined by the letter code under "AX" of Vehicle Certification Label.
Transaxle can also be identified by a metal tag attached to side of bellhousing. See Fig 1 . First line on tag shows build date code and model number. Bottom line on tag shows serial and assembly part number prefix and suffix. Always refer to this tag when ordering parts.