LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe GL, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Gear - Variable >> Testing >> Pinpoint Test D4: Vehicle Speed Sensor Function >> For Analog (Electro-Mechanical) Display Dash Only
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

For Analog (Electro-Mechanical) Display Dash Only

Turn ignition off. Remove instrument cluster. See VEHICLE SPEED SENSOR: ANALOG  under REMOVAL & INSTALLATION. Disconnect speedometer cable from instrument cluster. Connect ohmmeter between Green/Red wire and Black wire of instrument cluster connector. Rotate speedometer cable connector on instrument cluster. If there are 4 continuity interruptions per speedometer cable rotation, proceed to PINPOINT TEST D5  . If there are NOT 4 continuity interruptions, replace speedometer subassembly.

NOTE: The vehicle speed sensor is part of the speedometer subassembly on analog display dash equipped vehicles. The speedometer subassembly must be replaced when vehicle speed sensor is defective.
scientia non olet · About LEMON Manuals