LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 4EAT >> On-Vehicle Service >> Line Pressure Adjustment >> Probe
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Line Pressure Adjustment: Probe

  1. Place transaxle in Park. Remove left splash shield. Connect pressure gauge at line pressure inspection hole (square head plug "L"). See Figure .
  2. Start engine, and warm it to normal operating temperature. Loosen kickdown cable lock nut until line pressure exceeds 63 psi (434 kPa). Tighten kickdown cable lock nut. Ensure line pressure is 63-66 psi (434-455 kPa).
scientia non olet · About LEMON Manuals