LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe LX, Automatic >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test Q4 >> Test Connector Ground Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Test Connector Ground Check

Disconnect VAPS test connector from mounting. Set VOM on 200-ohm scale. Measure resistance between Black wire and ground. If resistance is less than 5 ohms, proceed to PINPOINT TEST Q5  . If NOT as specified, repair Black wire between test connector and ground.

scientia non olet · About LEMON Manuals