LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Probe Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - EEC-IV >> Air Induction Systems >> Variable Induction Systems >> Intake Air Control Solenoid (Taurus SHO & Mark VIII)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Air Control Solenoid (Taurus SHO & Mark VIII)

With engine off, wait 10 seconds, and then disconnect Intake Air Control (IAC) solenoid. Solenoid is mounted on firewall side of intake plenum. Using an ohmmeter on 200-ohm scale, check resistance between IAC solenoid terminals. Resistance should be 50-100 ohms. If resistance is not as specified, replace solenoid.

scientia non olet · About LEMON Manuals