LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1995 >> Aerostar Van Window, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 3.0L >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

Disconnect battery ground cable. Powertrain Control Module (PCM) is located in cowl on passenger side. Remove cowl top vent panel. Loosen engine control sensor wiring to PCM connector retainer bolt. Remove engine control sensor wiring connector from PCM. Remove two PCM cover nuts. Remove PCM cover. Pull powertrain control module out of bracket. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals