Terminal Identification

WARNING: This page is about a different variant/trim than selected.

NOTE: Test procedures require Breakout Box (014-00322) and ABS Adapter (T90P-50-ALA). See Fig 1 -14 for terminal ID. See COMPONENT LOCATIONS for connector and component locations. Measure voltage using digital voltmeter.

Fig 1: Identifying Main Power Relay Terminals

Courtesy of FORD MOTOR CO.

Fig 2: Identifying Pump Motor Relay 4-Pin Harness Connector

Courtesy of FORD MOTOR CO.

Fig 3: Identifying Pump Motor Relay Terminals

Courtesy of FORD MOTOR CO.

Fig 4: Identifying Pump Motor Relay 7-Pin Harness Connector

Courtesy of FORD MOTOR CO.

Fig 5: Identifying Fluid Reservoir Cap Terminals

Courtesy of FORD MOTOR CO.

Fig 6: Identifying Valve Body 19-Pin Connector Terminals

Courtesy of FORD MOTOR CO.

Fig 7: Identifying Valve Body 16-Pin Connector Terminals

Courtesy of FORD MOTOR CO.