Power Window Master Switch
- Use self-powered test light or ohmmeter to check switch continuity. With switch in neutral position, continuity should exist between switch terminals No. 1, 3, 4, 5, and 6. See Fig 1 .
- Place switch in close position, continuity should exist between switch terminals No. 1, 2 and 3, and terminals No. 4, 5 and 6.
- Place switch in open position, continuity should exist between switch terminals No. 1, 3 and 5, and terminals No. 2, 4 and 6. If switch continuity is not as specified, replace switch.