DTC B1601: Incorrect Key Code From Ignition Key Transponder
WARNING: This page is about a different car, the 1997 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- Clear DTCs and rerun On-Demand Self-Test. See ON-DEMAND SELF-TEST in MODULE COMMUNICATIONS NETWORK article. If DTC B1601 is present, go to next step. If DTC B1601 is not present, system is operating properly.
- Using an existing and a new encoded key, program new key. See SPARE KEY PROGRAMMING under SERVICE PROCEDURES. Attempt to start engine. If THEFT indicator light turns on for 2 seconds and engine will start, system is operating properly. Replace damaged encoded ignition key. If THEFT indicator light does not turn on for 2 seconds and engine will not start, go to next step.
- Set aside original encoded ignition keys. Using one new key, perform key initialization. See KEY INITIALIZATION under SERVICE PROCEDURES. Using newly encoded key, attempt to start engine. If engine starts and keeps running, replace original encoded ignition key with newly programmed key. Program a spare key if necessary. Refer to SPARE KEY PROGRAMMING under SERVICE PROCEDURES. Retest system. If engine will not start, clear DTCs and rerun On-Demand Self-Test. Repair as necessary. If no other DTCs are present except DTC B1601, replace PATS transceiver module and retest system.