Transmitter Programming
NOTE:
A maximum of 4 transmitters can be programmed for each Remote Anti-Theft Personality (RAP) module. Programming must be done at the same time for all transmitters.
- Verify that vehicle battery is fully charged and anti-theft system is not armed or triggered. Turn ignition switch off and on 5 times within 10 seconds, ending in ON position. If programming mode is successfully entered, the RAP module will lock and unlock all doors.
- Press any button on transmitter. Door locks will lock and unlock to acknowledge successful programming. Repeat this step to program additional transmitters. When finished programming all transmitters, turn ignition off.