Water Pump

NOTE: The threads of the No.1 water pump retaining bolt must be coated with Pipe Sealant with Teflon(R) D8AZ-19554-A or equivalent meeting Ford specifications WSK-M2G350-A2 and ESR-M18P7-A before installing. All others should be lightly oiled before installation with clean engine oil meeting Ford specification WSS-M2C153-F.


Retaining Bolts ... 20-30 Nm (15-22 ft. lbs.)
Retaining Studs ... 20-30 Nm (15-22 ft. lbs.)
Retaining Nuts ... 8-12 Nm (71-106 inch lbs.)