Cruise Control: Service and Repair

Brake Pressure (Deactivator) Switch Removal

CAUTION: Brake fluid contains polyglycolethers and polyglycol. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water and induce vomiting. Get medical attention immediately.

1. Disconnect Brake Pressure (Deactivator) Switch connector C127.

NOTE: Brake Pressure (Deactivator) Switch is located under brake master cylinder.

2. Unscrew switch and remove.

INSTALLATION

1. Follow removal procedure in reverse order.

2. Tighten switch to 15-20 Nm (11-14 Lb-Ft) and bleed hydraulic brake system. Brake Bleeding