Heated Seat Module

REMOVAL

WARNING:
^ ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) VEHICLE AND WHEN HANDLING AN AIR BAG MODULE. THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN ACCIDENTAL DEPLOYMENT.
^ AFTER DEPLOYMENT, THE AIR BAG SURFACE CAN CONTAIN DEPOSITS OF SODIUM HYDROXIDE, A PRODUCT OF THE GAS GENERANT COMBUSTION THAT IS IRRITATING TO THE SKIN. WASH YOUR HANDS WITH SOAP AND WATER AFTERWARD.

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

1. Remove the power front seat track.

NOTE: Be sure to read and follow all air bag warnings.







2. Disconnect the [1][2]heated seat module electrical connector.







3. Remove the [1][2]heated seat module.
1. Release the clip.
2. Remove the [1][2]heated seat module.

INSTALLATION

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.







1. Install the [1][2]heated seat module.







2. Connect the [1][2]heated seat module electrical connector.
3. Install the power front seat track.

NOTE: Be sure to read and follow all air bag warnings.

4. Check the restraint system for proper operation.
5. If equipped, prove out the air bag system.