Driver Door Window Regulator Control Switch

REMOVAL







1. Disconnect the battery ground cable.
2. Remove the front door trim panel.







3. Remove the window regulator switch plate harness assembly.
1. Remove the screws.
2. Remove the harness assembly.







4. Remove the window regulator control switch.
1. Pry the release tabs.
2. Remove the window regulator control switch.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.