Compass Zone Adjustment

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Compass Calibration Zones

Fig 1: Compass Calibration Zone Map

Courtesy of FORD MOTOR CO.

The factory zone setting is set to Zone 8. Check the map to verify the correct compass zone setting for your geographic location.
Turn the ignition switch to the RUN position.
From the info menu, press and hold the SETUP and RESET buttons simultaneously until the message center shows the current zone setting.
Release the SETUP and RESET buttons. Press the SETUP button until the correct zone setting is displayed.
To exit the zone setting mode, and to lock in the change, press and release the RESET button.