LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 538 (Body Panel System - Exterior) >> Removal And Installation >> Fender >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Fender: Notes

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire. For additional information, Refer to WHEEL AND TIRE -- FRONT .
  2. Remove the front bumper cover. For additional information, Refer to FRONT BUMPER .
  3. Remove the front rocker moulding. For additional information, Refer to MOULDINGS .
  4. Remove the parts in the order indicated in the following illustration and table.

    To remove individual parts, only carry out the listed steps: 

    Part Steps
    Fender 1-7
    Fig 1: Removing Front Fender
    G03246627Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.