Spring Lock Couplings: Connect

WARNING: This page is about a different car, the 2003 Ford Econoline and 2003 Ford E450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Inspect and clean both coupling ends.

NOTE: Replace the O-ring seals (9229).

NOTE: Lubricate the O-ring seals with 5W30 engine oil meeting Ford specification WSS-M2C153-G or equivalent prior to installation to help seal and ease the installation.

Fig 1: Inspect And Clean Both Coupling Ends

Courtesy of FORD MOTOR CO.

Push together the spring lock coupling fittings until the spring engages.