Scan Tool
WARNING: This page is about a different car, the 2004 Ford Pickup Heritage. However, it is still accessible from the selected car via links, so may be relevant.
The scan tool is connected to the data link connector (DLC) for communication with the vehicle. Refer to the scan tool operating manual for information on:
- Specific cables and/or adapters necessary for hookup.
- Correct scan tool set-up.
- Scan tool functions.
The required scan tool functions are:
- Monitor, record and playback of PIDs.
- Freeze frame PID data.
- Diagnostic test modes (self test/clear diagnostic DTCs).
- Output Test Mode.