Connecting Rod
| Connecting rod | Piston pin bore | diameter | 21.017-21.031 | |
| Crankshaft bearing bore | diameter | 53.015-53.035 | ||
| Length | center-to-center | 138.06-138.14 | ||
| Alignment Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203mm bar 101.5 mm on each side of rod centerline | bore-to-bore max. Diff | Twist per 25 mm of length | 0.050 | |
| Bend per 25 mm of length | 0.038 | |||
| Side clearance | assembled to crank | Standard | 0.100-0.30 | |
| Service limit | 0.35 |