LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Repair >> Transmission Support CROSSMEMBER >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transmission Support CROSSMEMBER: Removal

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING & CABLES .
  2. Raise the vehicle on a hoist.
  3. Remove the exhaust system. For further information, refer to EXHAUST SYSTEM .
  4. Support the transmission with a suitable jack.
  5. Remove the transmission support crossmember.
    1. Remove the nuts retaining the transmission support insulator to the transmission support crossmember.
    2. Remove the bolts retaining the transmission support crossmember to the body brackets. Remove the transmission support crossmember.
    Fig 1: Identifying Transmission Support Insulator Nuts & Transmission Support Crossmember Bolts
    G01940344Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals