Removal and Installation

WARNING: This page is about a different car, the 2004 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
Disconnect the electrical connectors.

Fig 1: Disconnecting Electrical Connectors
Courtesy of FORD MOTOR CO.
Raise and support the vehicle. For additional information, refer to JACKING & LIFTING .
Remove the screws and the control module.

Fig 2: Removing Screws And Control Module
Courtesy of FORD MOTOR CO.

NOTE: The 4x2 module cannot be interchanged with the 4x4 module. The 4x4 module is interchangeable with the 4x2 module.

To install, reverse the removal procedure.