Sun and Shell Assembly-Disassembly: Assembly
WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble the one-way clutch.
- The lower cap lip must face up.
- The low one-way clutch outer race groove must face up.
- The low one-way clutch shoulder must face up.
- The upper cap lip must face down.
- Install the low one-way clutches as an assembly with the groove facing up.
NOTE:
The one-way clutch assembly must be assembled in a specific order.
CAUTION:
The outer race must rotate counterclockwise. Make sure end caps are fully seated.