Master Window/Door Lock Switch

NOTE: Power door lock and power window switch is combined into one switch (master window/door lock switch). This test is only for the power door lock circuits of the switch. For POWER DOOR LOCKS & REMOTE KEYLESS ENTRY SYSTEMS circuit identification. See WIRING DIAGRAMS .

Remove master window/door lock switch. See MASTER & PASSENGER WINDOW/DOOR LOCK SWITCH under REMOVAL & INSTALLATION. Check continuity between appropriate switch terminals with switch in appropriate position. See MASTER WINDOW/DOOR LOCK SWITCH TESTING table. See Figure (Coupe) or Figure(Convertible) . If continuity does not exist between specified terminals, replace master window/door lock switch.

MASTER WINDOW/DOOR LOCK SWITCH TESTING

Switch Position

Continuity Between Terminals No.

Lock

3 & 4

Neutral

⁽¹⁾

Unlock

2 & 3

⁽¹⁾	With door lock switches at rest, continuity should not exist between terminals No. 2 and 3 or between terminals No. 3 and 4.