LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Windstar Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Valve - Stem Diameter
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Valve - Stem Diameter

  1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification.
    • If out of specification, install new components as necessary. Refer to ENGINE for the procedure .
      Fig 1: Measuring Diameter Of Each Intake And Exhaust Valve Stem
      G03424792Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals