Torque Converter Insert Check: Check

WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Install the oil pump drive shaft into the torque converter.

Fig 1: Installing Oil Pump Drive Shaft Into Torque Converter
Courtesy of FORD MOTOR CO.
Install a torque wrench with a 5/16 inch Allen head socket attached on the oil pump drive shaft.

Fig 2: Installing Torque Wrench
Courtesy of FORD MOTOR CO.
Verify that the insert can hold torque.

Fig 3: Installing Torque Wrench
Courtesy of FORD MOTOR CO.
If the insert cannot hold the specified torque, install a new torque converter.