Removal (Spring Lock Coupling)
WARNING: This page is about a different car, the 2003 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
- Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Using Spring Lock Coupling Remover (T90T-9550-S), remove retaining clip from coupling. Place remover over coupling so protrusion is positioned on cage opening side of coupling. See Fig 1.
- Close remover over coupling. Push remover into cage opening to release female fitting from garter spring. Separate male and female halves of coupling. Remove tool from disconnected spring lock coupling.