LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 498 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Driven Sprocket Support >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driven Sprocket Support: Assembly

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: The seal rings must be installed correctly. Transmission failure could result.
    Fig 1: Installing New Teflon® Seals And No. 5 Thrust Washer
    G03244840Courtesy of FORD MOTOR CO.
  1. Install new Teflon® seals and the No. 5 thrust washer.
  2. Make sure that the seals are mated correctly during installation.
    Fig 2: Verifying That Seals Are Mated Correctly During Installation
    G03244841Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals