LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 437 (Parking Aid System) >> General Procedures >> Elevation System Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Elevation System Check

WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ground reflection verification and sensor coverage pattern.
    Fig 1: Identifying Ground Reflection Verification And Sensor Coverage Pattern
    G03425948Courtesy of FORD MOTOR CO.
  2. The parking aid system must be checked to assure that the system does not see signals from ground reflections.
  3. The following system check should be carried out with the vehicle on a 15 feet wide by 10 feet deep smooth concrete surface, free of all obstacles. The area should also be free of noise from fans and pneumatic tools.
  4. Turn the ignition to the on position, engine off.
  5. Set the parking brake on.
  6. Place the gear shift in reverse.
  7. NOTE: No audible alerts should be heard. If audible alerts are heard, check to make sure the bumper is properly installed and is not tilted downward so that the sensor is pointing at the ground.
  8. Verify that no audible alerts are heard.