Driven Sprocket Support: Assembly

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: The seal rings must be installed correctly. Transmission failure could result.

Fig 1: Installing New Teflon® Seals And No. 5 Thrust Washer

Courtesy of FORD MOTOR CO.

Install new Teflon® seals and the No. 5 thrust washer.
Make sure that the seals are mated correctly during installation.

Fig 2: Verifying That Seals Are Mated Correctly During Installation
Courtesy of FORD MOTOR CO.