LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2004 >> Explorer Sport Trac 4D Utility >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle/Transmission >> Diagnosis And Testing >> Diagnostic Flow Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Flow Chart

DIAGNOSTIC FLOW

Diagnostic Flow Chart
  • Know and understand the customer's concerns
  • Check the fluid level and condition
  • Verify the concern by operating the vehicle
  • Check for non-factory-installed items and verify correct installation
  • Check the shift linkage adjustments
  • Check TSBs messages for vehicle concerns
  • Carry out quick test both KOER and KOEO
  • Record all codes
1) Did you record any Diagnostic Trouble Codes?
Yes
No
2) Are any continuous test memory codes present? Yes
  • CLEAR codes and carry out drive cycle test.
No
  • GO to Step 4.
3) Did the continuous test memory codes reappear? Yes
No
  • GO to Step 4.
4) Is the concern repaired? Yes
  • CARRY OUT the final quick test to verify that no Diagnostic Trouble Codes are present. CLEAR memory codes.
No
5) Are there any electrical concerns? Yes
  • INSTALL the diagnostic tool and CARRY OUT output state control test, then GO to Step 6.
No
6) Was the transmission concern corrected when the scan tool was installed? Yes
No
7) Is the concern repaired? Yes
  • CARRY OUT the final quick test to verify that no diagnostic trouble codes are present. CLEAR memory codes.
No
  • No further testing is available. Repeat procedures as necessary.