Pressure Feedback Exhaust Sensor: Service and Repair

DIFFERENTIAL PRESSURE FEEDBACK EXHAUST GAS RECIRCULATION (EGR) SYSTEM

REMOVAL







1. NOTE:
- The 4.6L (2V) is shown. The 4.6L (4V) and 3.8L are similar.
- Bolts may be used in place of nuts on some applications.

Remove the differential pressure feedback EGR.
1 Disconnect the connector.
2 Remove the hoses.
3 Remove the nuts and the differential pressure feedback EGR.

INSTALLATION
1. To install, reverse the removal procedure.