LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2005 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Main Control Valve Body >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Main Control Valve Body: Disassembly

WARNING: This page is about a different variant/trim than selected.
    NOTE: The valve body separator plate has a bonded gasket. Do not reuse. Discard the plate.
    Fig 1: Removing Valve Body Separator Plate
    G03948942Courtesy of FORD MOTOR CO.
  1. Remove and discard the valve body separator plate.
  2. Remove the check balls.
    Fig 2: Removing Check Balls
    G03948943Courtesy of FORD MOTOR CO.
  3. NOTE: Refer to Figure or Figure.
  4. Disassemble the main control valve body only if cleaning is required.