Disassembly And Assembly Of Subassemblies: Piston: Assembly

WARNING: This page is about a different car, the 2005 Lincoln Navigator and 2005 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The connecting rod must be installed into the piston with identification markings toward the front.

Fig 1: Locating Connecting Rod & Piston Identification Marks

Courtesy of FORD MOTOR CO.

Position the connecting rod in the piston.
Lubricate the piston pin and pin bore with clean engine oil.
Install the piston pin in the piston and connecting rod assembly.
Install the piston pin retaining clips in the piston.
Lubricate the piston and the new piston rings with clean engine oil.
Install the piston rings onto the piston.