LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Expedition 4WD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal And Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation

  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  3. Disconnect the 2 PCM electrical connectors.
  4. Remove the 2 bolts and the ground cable.
    • To install, tighten to 7 Nm (62 lb-in).
  5. Remove the PCM.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals