LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Explorer 4.6 8, RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Auto Lock and Horn Chirp Programming >> Auto Lock Programming Using the Keyless Entry Keypad
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto Lock Programming Using the Keyless Entry Keypad

  1. Close all doors and windows.
  2. Confirm that the ignition key is OFF.
  3. Enter the 5-digit permanent entry code into the keyless entry keypad.
  4. Within 5 seconds of entering the code, press and hold the 3/4 button on the keyless entry keypad.
  5. Within 5 seconds of Step 3, and while holding the 3/4 button, press the 7/8 button on the keyless entry keypad and release it.
    6. NOTE: If the auto lock is disabled, the horn chirps once. If the auto lock feature is enabled, the horn chirps once shortly and then sounds a second time with a longer sound of the horn once the above sequence is completed.
  6. Within 5 seconds of Step 3, release the 3/4 button on the keyless entry keypad.
scientia non olet · About LEMON Manuals