Connecting Rod, Engine

Connecting Rod
Pin bore diameter 23.958-23.976 mm (0.943-0.944 inch)
Rod length 145.965-146.035 mm (5.746-5.749 inch)
Maximum allowed bend 0.0125 mm (0.00049 inch) per 25.4 mm (1.000 inch)
Maximum allowed twist 0.038 mm (0.0015 inch) per 25.4 mm (1.000 inch)
Bearing
Bore diameter 56.82-56.84 mm(2.2370-2.2378 inch)
Clearance to crankshaft 0.013-0.048 mm (0.0005-0.002 inch)
Side clearance (assembled to crankshaft) 0.092-0.268 mm (0.0036-0.0106 inch)

Connecting Rod Nuts
First pass 20 Nm (15 ft. lbs).
Final pass Tighten 90°