LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Crown Victoria Police Interceptor >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System - General Information >> General Procedures >> Spring Lock Couplings >> Connect
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Spring Lock Couplings: Connect

  1. Inspect and clean the tube fitting, spring lock coupling and the O-ring seals.
    • Lubricate the O-ring seals with clean engine oil.
    2. Fig 1: Clean & Inspect Coupling Ends
    GF0001244Courtesy of FORD MOTOR CO.
    NOTE: Make sure the spring lock coupling is completely seated and locked in place by pulling on the coupling.
  2. Connect the spring lock coupling onto the tube fitting.
    3. Fig 2: Connecting Spring Lock Coupling Onto Tube Fitting
    GF0046766Courtesy of FORD MOTOR CO.
  3. Install the safety clip.
    4. Fig 3: Installing Safety Clip
    GF0046767Courtesy of FORD MOTOR CO.
  4. Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING & CABLES article.
scientia non olet · About LEMON Manuals