Fluid - M/T: Service and Repair

Transmission Draining and Filling





1. NOTE: Position a suitable drain pan under the transmission.

Remove the drain plug and drain the transmission.





2. Clean and install the drain plug.
^ Tighten to 48 Nm (35 lb-ft).

3. NOTE: Before removing, clean the area around the filler plug.

Remove the filler plug.





4. NOTE: Fill the transmission with the vehicle on a level surface.

Using a suitable oil suction gun, fill the transmission to the correct level with the specified fluid. The fluid must be just below the fill plug hole.
^ Transmission capacity is 2.6L (2.8 qt).

5. Install the fill plug.
^ Tighten to 48 Nm (35 lb-ft).