Removal and Installation

NOTE: It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to AUDIO CONTROL MODULE (ACM) SELF-DIAGNOSTIC MODE .

NOTE: Module configuration is required when a new ACM is being installed.

Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
Remove the 4 screws and the ACM .
- Disconnect the electrical connectors and the antenna cable connector.
To install, reverse the removal procedure.

Download the configuration information to the ACM . For additional information, refer to PMI in MODULE CONFIGURATION .