LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Flex SE >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Stability Control Sensor Cluster >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

  1. Remove the front floor console rear storage compartment. For additional information, refer to the front floor console exploded view in INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the stability control sensor cluster electrical connector.
  3. Disconnect the stability control sensor cluster electrical harness retainers and position aside.
  4. Remove the 2 stability control sensor cluster bracket bolts and the stability control sensor cluster.
    • To install, tighten to 12 Nm (106 lb-in).
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals