Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Remove the audio unit. For additional information, refer to INFORMATION AND ENTERTAINMENT SYSTEMS article.
Remove the 2 screws and the instrument panel center finish panel.

Fig 1: Locating Instrument Panel Finish Panel Screws
Courtesy of FORD MOTOR CO.
- Disconnect the electrical connector.
Remove the 4 climate control assembly screws.
Disconnect the climate control assembly electrical connectors and vacuum connector.
Remove the climate control assembly.
To install, reverse the removal procedure.