Removal and Installation

Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
Remove the engine cover. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
Remove the 2 nuts for the glow plug module.
- To install, tighten to 8 Nm (71 lb-in).
  
  Fig 1: Locating Nuts And Glow Plug Module
  Courtesy of FORD MOTOR CO.
Position the glow plug module and disconnect the glow plug module electrical connectors. Remove the glow plug module.

Fig 2: Locating Nuts And Glow Plug Module
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.