LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Taurus X SEL, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Selector Lever: Removal

  1. Remove the center console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Disconnect the selector lever cable end from the selector lever.
    3. Fig 1: Identifying Selector Lever Cable End
    GF0045847Courtesy of FORD MOTOR CO.
  3. Depress the 2 tabs and remove the selector lever cable from the selector lever.
    4. Fig 2: Identifying Tabs
    GF0045848Courtesy of FORD MOTOR CO.
  4. Disconnect the electrical connector.
    5. Fig 3: Identifying Connector
    GF0045855Courtesy of FORD MOTOR CO.
  5. Disconnect the wire harness retainers from the selector lever.
    6. Fig 4: Identifying Wiring Harness Retainers
    GF0045856Courtesy of FORD MOTOR CO.
  6. Remove the LH and RH plastic retaining clips for the carpet.
    7. Fig 5: Identifying Retaining Clips
    GF0045857Courtesy of FORD MOTOR CO.
  7. Remove the 4 selector lever bolts and the selector lever from the vehicle.
    8. Fig 6: Identifying Bolts
    GF0045858Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals