Removal and Installation

Vehicles with 5.4L 4V engine 

1. Remove the battery tray. For additional information, refer to BATTERY, MOUNTING AND CABLES .

   All vehicles 

2. Disconnect the EGR system module tube-to-EGR system module fitting.
   • To install, tighten to 40 Nm (30 lb-ft).
3. Disconnect the EGR system module tube-to-exhaust manifold fitting and remove the tube.
   • To install, tighten to 40 Nm (30 lb-ft).
4. To install, reverse the removal procedure.