LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2010 >> Transit Connect Van Cargo >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Automatic Transaxle/Transmission >> In-Vehicle Repair >> Output Shaft Speed (OSS) Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Speed (OSS) Sensor: Installation

  1. Install the OSS  sensor.
    NOTE: Apply a light coat of clean transmission fluid to the O-ring before installation.
    • Tighten to 10 N.m (89 lb-in).
    • Connect the electrical connector.
    Fig 1: Locating OSS Sensor
    G06292821Courtesy of FORD MOTOR CO.
  2. Lower vehicle.
  3. Check the transmission fluid level and add transmission fluid as necessary.
  4. Start the engine and move the transaxle range selector lever through all gear positions.
scientia non olet · About LEMON Manuals