July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pinpoint Test

ATTEMPT TO TRAIN THE Tire Pressure Monitoring System (TPMS) SENSORS
NOTE: The Body Control Module (BCM) has a 2-minute time limit between sensor responses. If the Body Control Module (BCM) does not recognize any of the 4 Tire Pressure Monitoring System (TPMS) sensors during this time limit, the horn sounds twice, the message center displays TIRE NOT TRAINED REPEAT, and the entire procedure must be repeated.
1. TRAIN all 4 Tire Pressure Monitoring System (TPMS) sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training - Intelligent Access (IA) or REFER to Tire Pressure Monitoring System (TPMS) Sensor Training - Integrated Keyhead Transmitter (IKT) .
- Do all of the Tire Pressure Monitoring System (TPMS) sensors train?
- Yes: The system is operating correctly at this time. The concern may have been caused by Radio Frequency Interference (RFI).
- No: If one or more sensors trained, GO to step 2 . If none of the Tire Pressure Monitoring System (TPMS) sensors trained, REFER to Diagnostic Routine F .
CHECK FOR RADIO FREQUENCY INTERFERENCE

Ignition ON.
Move the vehicle to rotate the wheels at least one-fourth turn.
TRAIN all 4 Tire Pressure Monitoring System (TPMS) sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training - Intelligent Access (IA) or REFER to Tire Pressure Monitoring System (TPMS) Sensor Training - Integrated Keyhead Transmitter (IKT) .

Did the Tire Pressure Monitoring System (TPMS) sensor(s) train?

Yes: The system is operating correctly at this time. The concern may have been caused by Radio Frequency Interference (RFI).
No: INSTALL a new Tire Pressure Monitoring System (TPMS) sensor(s) for the sensor(s) in question. REFER to Tire Pressure Monitoring System (TPMS) Sensor .