LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2011 >> Fiesta L4-1.6L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Camshaft Gear/Sprocket
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Gear/Sprocket




Install the 2 camshaft phaser and sprocket, bolts and the VCT Alignment Tool.
Tighten the 2 bolts to 25 Nm (18 lb-ft).

NOTICE: Use an open-ended wrench to hold the camshafts by the hexagon to prevent the camshafts from turning.

Tighten the 2 camshaft phaser and sprocket bolts an additonal 75 degrees.
scientia non olet · About LEMON Manuals